Charm Box 3/16" (size for Pandora, Biagi, Troll style bracelets)     (Charm Box)
Seven Cavities, 6 different shapes, all with large holes, to create charm bracelet beads! The mandrel groove for this tool can accommodate a 5/32 or 3/16 mandrel. Nugget: 14.5mm square, 12mm thick Cube: 13mm on all sides Tube: 15mm long, 12mm thick Crystal: 12mm hole to hole, 14mm side to side and 17mm tip to tip Smaller Disk: 15mm tall, 6mm thick (hole to hole) Larger Disk: 16mm tall, 7mm thick (hole to hole) Sphere/Round/Ball: 15mm round

Crystal Large    (Crystal Large)
Size: 24mm hole to hole! That's 1"!! 26mm tip to tip! This tool accepts up to a 3/32nd mandrel. Note: A round bead gently marvered in the cavity of this tool is the perfect "pre-press" shape to get great ends around the mandrel.

Crystal Trio    (Crystal Trio)
This is the Crystal from the Cube Duo, in a Trio! This shape has become very popular and as a result it is now available in this new format allowing you to create Crystals in 10mm, 12mm and 14mm. This shape started in a Duo with a Cube, at which point it only came in 12mm.

Curved Focal    (Curved Focal)
This press has the same curve the mandrel has and has a mandrel groove large enough to accomodate this 1/8" mandrel. The finished bead measures 15mm wide, 56mm hole to hole (approx. 2 1/4") and is 8mm thick. Mandrels sold separately, or you can Purchase a kit of 3 mandrels and the press.

Diamond Trio    (Diamond Trio)
The Diamond Trio contains the Mini (13mm hole to hole and 14mm tip tip), Small (15mm hole to hole and 17mm tip to tip) and Medium (18mm hole to hole and 21mm tip to tip) Diamond tools.

Elipse Trio    (Elipse Trio)
ZooziiElipse...there are three sizes in this tool...Mini, Small and Medium. The holes go side to side, creating some great texture in finished jelwery pieces! The measurements are as follows: Thickness for all are 7mm Mini: 16.5mm long by 13mm wide Small: 19mm long by 15 wide Medium: 23 long by 18 wide This tool will accept up to a 3/32nd mandrel.

Gem Trio    (Gem Trio)
There are 18 flat surfaces on this bead...6 around the outer edge, then 6 facets on the top and 6 facets on the bottom. Depending how heavy handed you are with the firepolishing will depend how pronounced those facets are. The sizes are Mini (13mm), Small (15mm) and Medium (18)mm.

Hex Large    (Hex Large)
The ZooziiHex Large measures 1" hole to hole. It is 8mm thick.

Kalera Trio    (Kalera Trio)
This tool contains the mini, small and medium sizes. The measurements are as follows: Mini 15mm long x 10mm wide x 6mm thick Small 17mm long x 11mm wide x 7mm thick Medium 21mm long x 15mm wide x 9mm thick

Lentil Large    (Lentil Large)
This is a great alternative to the Lentil press. The sides are designed such that there is no indent where the mandrel exits the bead. This means the "puckers" on the ends, that some dislike about the lentil are gone! This shape is comfortable to wear NOW EVEN SLEEKER! This bead measures 1 1/4" hole to hole and is only 10mm thick!

Lentil SSL Trio L    (Lentil SSL Trio L)
This is a great alternative to the Lentil press. The sides are designed such that there is no indent where the mandrel exits the bead. This means the "puckers" on the ends, that some dislike about the lentil are gone! This shape is comfortable to wear NOW EVEN SLEEKER! This trio comes in the standard ZooziiSizes, Small (15mm), Medium (18mm) and Medium+ (21mm), but is even thinner then the original Straight Sided Lentil Shape. Small 6.5mm, Medium 7, Medium+ 8.5mm.

Lentil SSL Trio S    (Lentil SSL Trio S)
This is a great alternative to the Lentil press. The sides are designed such that there is no indent where the mandrel exits the bead. This means the "puckers" on the ends, that some dislike about the lentil are gone! This shape is comfortable to wear NOW EVEN SLEEKER! This trio comes in the standard ZooziiSizes, Mini (13mm), Small (15mm) and Medium (18mm), but is even thinner then the original Straight Sided Lentil. Mini 6.5mm, Small 6.5mm and Medium 7mm.

Lentil Trio    (Lentil Trio)
This tool contains the Mini(13mm), Small(15mm) and Medium (18mm) sizes of the ZooziiLentil.

Lentil XL    (Lentil XL)
This is a great alternative to the Lentil press. The sides are designed such that there is no indent where the mandrel exits the bead. This means the "puckers" on the ends, that some dislike about the lentil are gone! This shape is comfortable to wear NOW EVEN SLEEKER! This bead measures 1 1/2" hole to hole and is only 11mm thick!

Lovin' Heart Large    (Lovin' Heart Large)
ZooziiLovin' Large This tool allows you to make hearts that are consistant in size. The bottom of the tool forms the point of the heart and the top of the tool forms the top of the heart. Once the bead comes out of the press you need to add the indent yourself. This allows flexibility to make a deep or shallow crease. You could also leave it without a crease and you would have a very pretty triangular drop bead! The heart this tool assists you in making measures 25mm hole to hole and 25mm tip to tip, or about 1". It is 15mm thick at the thickest point. What you NEED TO KNOW: I recommend a razor tool. You could use a butter knife or other tool that has a similar blade.

Lovin' Heart Medium    (Lovin' Heart Medium)
ZooziiLovin' Medium This tool allows you to make hearts that are consistant in size. The bottom of the tool forms the point of the heart and the top of the tool forms the top of the heart. Once the bead comes out of the press you need to add the indent yourself. This allows flexibility to make a deep or shallow crease. You could also leave it without a crease and you would have a very pretty triangular drop bead! The heart this tool assists you in making measures 17mm hole to hole and 17mm tip to tip, or about 3/4". It is 20mm thick at the thickest point. What you NEED TO KNOW: I recommend a razor tool. You could use a butter knife or other tool that has a similar blade.

Lovin' Heart Small    (Lovin' Heart Small)
ZooziiLovin' Small This tool allows you to make hearts that are consistant in size. The bottom of the tool forms the point of the heart and the top of the tool forms the top of the heart. Once the bead comes out of the press you need to add the indent yourself. This allows flexibility to make a deep or shallow crease. You could also leave it without a crease and you would have a very pretty triangular drop bead! The heart this tool assists you in making measures 15mm hole to hole and 15mm tip to tip, or about 1/2". It is 12mm thick at the thickest point. What you NEED TO KNOW: I recommend a razor tool. You could use a butter knife or other tool that has a similar blade.

Medium and Duo    (Medium and Duo)

Nugget Trio     (Nugget Trio )
Do you love the feel of squeezed beads? Do you wish they had a more defined shape? You now have the best of both worlds! The Nuggets have the soft slope of the Kalera Long and Lean, but they are shaped into square nuggets with this wonderful new tool! Mini: 13mm square and 6mm thick Small: 15mm square and 7.5mm thick Medium: 18mm square and 8mm thick

Pillow trio    (Pillow Trio)
This tool contains a Mini (13mm), Small (15mm) and Medium (18mm).

Round Knob    (Round Knob)
The Press makes a knob that measures 1" around and has a tube about 7/16" long which allows for easy grasping.

Slim Nugget Trio Large    (Slim Nugget Trio Large)
A Nugget Trio with a slimmer profile. Cavity Sizes: 15mm square and 6 mm thick 18mm square and 6.5 mm thick 21mm square and 7 mm thick Tips: •Make a pre-press shape bead that is a squatty tube, about 1mm shorter than the press is wide. Starting with a tube instead of a round shape, will help to fill in the corners better. •If you don't have enough glass, and have a corner, or edge this is not crisp, or is rounded, then do not add glass where it is lacking. Instead, add glass to the top and bottom (where you would normally put your surface decorations). Add a dot of glass on the top and bottom, then heat and press. This keeps the glass in the center of the press cavity, allowing the glass to be pushed down and out into the edges and corners, making adding glass more efficient and easier. •You can press as many times as you need to in order to obtain a nice crisp shape. Just be sure to give the glass enough heat between pressings, and you will not have a problem with cracking.

Slim Nugget Trio Small    (Slim Nugget Trio Small)
A Nugget Trio with a slimmer profile. Cavity Sizes: 13 square and 5.5 mm thick 15 mm square and 6 mm thick 18 mm square and 6.5 mm thick Tips: •Make a pre-press shape bead that is a squatty tube, about 1mm shorter than the press is wide. Starting with a tube instead of a round shape, will help to fill in the corners better. •If you don't have enough glass, and have a corner, or edge this is not crisp, or is rounded, then do not add glass where it is lacking. Instead, add glass to the top and bottom (where you would normally put your surface decorations). Add a dot of glass on the top and bottom, then heat and press. This keeps the glass in the center of the press cavity, allowing the glass to be pushed down and out into the edges and corners, making adding glass more efficient and easier. •You can press as many times as you need to in order to obtain a nice crisp shape. Just be sure to give the glass enough heat between pressings, and you will not have a problem with cracking.

Special Diamond Duo    (Special Diamond Duo)
The Special Diamond Duo contains the Medium (18mm hole to hole and 21mm tip to tip), and the a Medium+ (21mm hole to hole and 24mm tip to tip) sizes.

Star    (Star)
This is a fun tool! This is not a press that takes a glob and forms a bead. There are several steps to fitting the glass into this tool. The finished result is worth the extra work, and all in all, it's much faster then hand shaping a star, but it is not a Beginner Press.

Sweetheart XL    (Sweetheart XL)
This duo contains to different hearts. One is the Sweetie style with the faceted edges. The other is a tile style heart with straight edges. This will make great sets! Not too big for earrings, and perfect for bracelets! Tile Heart: 17mm tip to tip, 17mm side to side and 6mm thick SweetHeart: 20mm tip to tip, 20mm side to side and 6mm thick

Tear Drop Duo    (Tear Drop Duo)
This is a drop that has the mandrel going side to side through the top. It is a great tool, and is user friendly, however it requires a reasonable amount of heat control, so may not be great for a new bead maker. It is fun to work with and makes a great pendant! Dimensions: Small: 19mm top to bottom (3/4"), 12mm across the widest point of the drop, and 7mm thick. Medium: 25mm top to bottom (1"), 17mm across the widest point of the drop, and 7mm thick.