Graphite Torch Marver for Major or MidRange Plus Bench Burner    (Marver - Major)
Graphite Torch Marver for Major or MidRange Plus Bench Burner

Graphite Torch Marver for MidRange Bench Burner    (Marver -- Mid)
Graphite top mount marver for Midrange bench burner

Graphite Torch Marver for Minor Bench Burner    (Marver--Minor)
Minor Torch Marver. Torch Marver for Minor/ Mega Minor Bench Burner. Graphite Block with lip measures 3" x 2" x 3/4" thick attaches directly to the top of your torch. For marvering without picking up your graphite paddle. Because this is on top of your torch, it stays warm and makes for a great place to keep your millifiore pre-heated.

Graphite Pad - 6 in x 6 in x 3/8 in    (Pad - GR)
Graphite Pad, 6" x 6" x 3/8". Used for marvering or placing frits or powders to be picked up. Un-burnable. Great for protecting your table top.

Graphite Pad - 10 in x 10 in x 3/8 in     (Pad - GR-LG)
Graphite Pad - 10 in x 10 in x 3/8 in

Graphite Paddle - 2.5 in x 1.5 in x 3/8 in     (Paddle- GR-SM)
Graphite Paddle - 2.5 in x 1.5 in x 3/8 in

Graphite Paddle - 5 in x 3 in x 3/8 in    (Paddle-GR-LG)
Graphite Paddle - 5 in x 3 in x 3/8 in

Graphite Paddle - 3 in X 2 in X 3/8 in     (Paddle-GR-M)
Graphite Paddle - 3 in X 2 in X 3/8 in

Graphite Paddle - 1 1/4 in x 2 in x 3/8 in     (Paddle-GR-Mini)
Graphite Paddle - 1 1/4 in x 2 in x 3/8 in

Graphite Paddle - 6 in x 4 in x 3/8 in     (Paddle-GR-XLG)
Graphite Paddle - 6 in x 4 in x 3/8 in

Graphite Octagon Reamer - 10 mm - 25 mm x 6 in     (Reamer - Lg)
Graphite Octagonal Reamer, 10mm-25mm x 6" long.

Graphite Octagon Reamer - 2 mm - 15 mm x 5 in    (Reamer - Point)
Graphite Octagonal Reamer, 2mm-15mm x 5" long

.5 In x 12 in length Graphite Rod    (Rod - GR 1/2)
.5 In x 12 in length Graphite Rod

.75 in x 12 in length Graphite Rod    (Rod - GR 3/4)
.75 in x 12 in length Graphite Rod

5/8 in x 12 in length Graphite Rod    (Rod - GR 5/8)
5/8 in x 12 in length Graphite Rod

7/8 in x 12 in length Graphite Rod    (Rod - GR 7/8)
7/8 in x 12 in length Graphite Rod

1 in x 12 in length Graphite Rod    (Rod - GR1)
7/8 in x 12 in length Graphite Rod

.25 in x 12 in length Graphite Rod    (Rod - GR1/4)
.25 in x 12 in length Graphite Rod

1/8 in Graphite Rod    (Rod - GR1/8)
Carbon Rod, 1/8". 1/8" diameter Graphite Cylindrical Carbon Rod. Perfect for shaping and pushing. Can be carved with designs to push into hot glass.

3/8 in x 12 in length Graphite Rod    (Rod - GR3/8)
3/8 in x 12 in length Graphite Rod

3/16 in x 12 in length Graphite Rod    (Rod -- GR3/16)
3/16 in x 12 in length Graphite Rod